Dog Fence With 2 Collar: 

*Features*:

*Efficient Dog Fencing System*:The transmitter,receiver and boundary wire forms an effective fencing system together to deter our dogs from the designated area,which greatly ensures our pets’ safety. The boundary wire creates an effective signal field when the transmitter is working. If your dog tends to walk out of the boundary,the transmitter will emit a harmless radio signal. Once the signal is detected by the receiver,it will automatically start warning beep,vibration or static shock to urge your dog to go back into the boundary.
*3 Effective Correction Modes*:The receiver works automatically once you start up the system. If your dog walks out of the boundary,the preset correction signals will be delivered cycle by cycle until the receiver battery is out of power. Mode 1:Beep+Vibration;Mode 2: Beep+Low Level Shock;Mode 3:Beep+High Level Shock. We also offer 20 training flags for you carry out proper training to ensure that the dog understands the boundaries and responds appropriately to the correction signals.
*Adjustable Signal Width & Multiple Dogs Support*:One transmitter can pair with multiple receivers. The transmitter also comes with 1.77 acre signal field range and 9 adjustable levels. The signal width can be increased .5m/1.6ft per level from boundary wire to warning zone and from boundary wire to static correction zone. The wire break warning can tell you in time if the wire is broken. The 'OK' indicator tells if the loop is right.
*Adjustable & Waterproof Receiver Collar*:With the 320mAh inbuilt rechargeable battery,our receiver keeps standby for 3-7 days after fully charged for 1.5-2 hours. Featured with IPX8 waterproof level,our receiver greatly extends its service life and allows your dog to play in wet grass or rainy weather. In addition,the receiver collar is 24.21in long,which can be adjusted to fit your dog’s neck properly. Fit for dog of all sizes. Note:Our package only contains 2 receivers and 2 collar straps.
*Easy To Test & Use*:Easy to test. First,pull out 50ft boundary wire and strip off the insulating layer of both ends. Second,make an enclosed loop with the wire and insert both ends into the terminals on the transmitter. Third,install 2 metal probes on the bottom of the receiver,and put the test bulb on. Fourth,turn on the transmitter after inserting the power cord. Fifth,hold the receiver close to the boundary wire and observe. Easy to use. We also offer silicone caps to protect your dog’s neck.

Friendly Reminder:
1. It’s important to adjust the collar to properly fit the dog’s neck.
2. For long-haired dogs,please trim some hair on your dog’s neck to ensure good contact of the metal probes.
3. Please do not let your dog wear the receiver collar for more than 12 hours per day(Recommend 2 Hours Every Time).
4. Please keep this receiver away from children to avoid their playing causing unintended electric shock.
5. Beep,vobration and shock signals can’t adjust level intensity.
6. Proper training is essential to ensure that the dog understands the boundaries and responds appropriately to the warning signals.
7. If your dog is aggressive,you’d better to consult with an animal professional before using our electronic dog fence system.
8. Only suitable for dogs.

*Specifications*:

Product Type: Electric Dog Fencing System
Material: ABS +PU Leather
Transmitter Voltage: 110V/60Hz(US Plug)
Per Receiver Input: 3.7V/0.01A
Per Receiver Inbuilt Battery: 3.7V 320mAh Rechargeable Battery
Per Receiver Runtime: Around 3-7 Days
Per Receiver Charging Time: Around 1.5-2 Hours
Receiver Modes:
*Mode 1:Beep+Vibration
*Mode 2:Beep+Low Level Shock
*Mode 3: Beep+High Level Shock
Waterproof Level(Receiver): IPX8
Signal Field Range: ≤7165 Square Meters/77123Square FT/1.77Acre
Adjustable Signal Width Levels(Transmitter): 1-9 Levels
Adjustable Signal Width: 0.5-4.5m/1.6-14.8ft(Increase 0.5M/1.6FT Per Level)
Suggested Wire Bury Depth: 1-2in Underground
Boundary Wire Length: 300m/984FT
Per Flag Length:19.4cm/7.64in
Receiver USB Cable Length: 82.5cm/32.48in
Transmitter Adapter Cord Length: 103cm/40.55in
Collar Strap Length: 61.5cm/24.21in
Transmitter Size: 10x10x2cm/3.94x3.94x0.79in
Transmitter Weight: 105g/0.23 lbs
Per Receiver Size: 8x4x2.7cm/3.15x1.57x1.06in
Per Receiver Weight: 58g/0.13 lbs
Package Size: 30.5*23.5*7cm/12.01*9.25*2.76in
Package Weight: 1374g/3.03lbs

*Package Lists*:

1x Transmitter
1x Adapter with Cord for Transmitter
2x Receivers
2x Collar Straps
2x USB Cables for Receiver
4 x Long Metal Probes
4 x Short Metal Probes
4 x Short Conductive Silicone Caps
4 x Long Conductive Silicone Caps
1x Test Bulb
20 x Training Flags
1 Coil x Boundary Wire
2 x Screws
2 x Plastic Anchors
1x User Manual

Dog Fence With 1 Collar: 

*Features*:

*Efficient Dog Fencing System*:The transmitter,receiver and boundary wire forms an effective fencing system together to deter our dogs from the designated area,which greatly ensures our pets’ safety. The boundary wire creates an effective signal field when the transmitter is working. If your dog tends to walk out of the boundary,the transmitter will emit a harmless radio signal. Once the signal is detected by the receiver,it will automatically start warning beep,vibration or static shock to urge your dog to go back into the boundary.
*3 Effective Correction Modes*:The receiver works automatically once you start up the system. If your dog walks out of the boundary,the preset correction signals will be delivered cycle by cycle until the receiver battery is out of power. Mode 1:Beep+Vibration;Mode 2: Beep+Low Level Shock;Mode 3:Beep+High Level Shock. We also offer 20 training flags for you carry out proper training to ensure that the dog understands the boundaries and responds appropriately to the correction signals.
*Adjustable Signal Width & Multiple Dogs Support*:One transmitter can pair with multiple receivers. The transmitter also comes with 1.77 acre signal field range and 9 adjustable levels. The signal width can be increased .5m/1.6ft per level from boundary wire to warning zone and from boundary wire to static correction zone. The wire break warning can tell you in time if the wire is broken. The 'OK' indicator tells if the loop is right.
*Adjustable & Waterproof Receiver Collar*:With the 320mAh inbuilt rechargeable battery,our receiver keeps standby for 3-7 days after fully charged for 1.5-2 hours. Featured with IPX8 waterproof level,our receiver greatly extends its service life and allows your dog to play in wet grass or rainy weather. In addition,the receiver collar is 24.21in long,which can be adjusted to fit your dog’s neck properly. Fit for dog of all sizes. Note:Our package only contains 1 receiver and 1collar strap.
*Easy To Test & Use*:Easy to test. First,pull out 50ft boundary wire and strip off the insulating layer of both ends. Second,make an enclosed loop with the wire and insert both ends into the terminals on the transmitter. Third,install 2 metal probes on the bottom of the receiver,and put the test bulb on. Fourth,turn on the transmitter after inserting the power cord. Fifth,hold the receiver close to the boundary wire and observe. Easy to use. We also offer silicone caps to protect your dog’s neck.

Friendly Reminder:
1. It’s important to adjust the collar to properly fit the dog’s neck.
2. For long-haired dogs,please trim some hair on your dog’s neck to ensure good contact of the metal probes.
3. Please do not let your dog wear the receiver collar for more than 12 hours per day(Recommend 2 Hours Every Time).
4. Please keep this receiver away from children to avoid their playing causing unintended electric shock.
5. Beep,vobration and shock signals can’t adjust level intensity.
6. Proper training is essential to ensure that the dog understands the boundaries and responds appropriately to the warning signals.
7. If your dog is aggressive,you’d better to consult with an animal professional before using our electronic dog fence system.
8. Only suitable for dogs.

*Specifications*:

​Product Type: Electric Dog Fencing System
Material: ABS +PU Leather
Transmitter Voltage: 110V/60Hz(US Plug)
Receiver Input: 3.7V/0.01A
Receiver Inbuilt Battery: 3.7V 320mAh Rechargeable Battery
Receiver Runtime: Around 3-7 Days
Receiver Charging Time: Around 1.5-2 Hours
Receiver Modes:
*Mode 1:Beep+Vibration
*Mode 2:Beep+Low Level Shock
*Mode 3: Beep+High Level Shock
Waterproof Level(Receiver): IPX8
Signal Field Range: ≤7165 Square Meters/77123Square FT/1.77Acre
Adjustable Signal Width Levels(Transmitter): 1-9 Levels
Adjustable Signal Width: 0.5-4.5m/1.6-14.8ft(Increase 0.5M/1.6FT Per Level)
Suggested Wire Bury Depth: 1-2in Underground
Boundary Wire Length: 300m/984FT
Per Flag Length:19.4cm/7.64in
Receiver USB Cable Length: 82.5cm/32.48in
Transmitter Adapter Cord Length: 103cm/40.55in
Collar Strap Length: 61.5cm/24.21in
Transmitter Size: 10x10x2cm/3.94x3.94x0.79in
Transmitter Weight: 105g/0.23 lbs
Receiver Size: 8x4x2.7cm/3.15x1.57x1.06in
Receiver Weight: 58g/0.13 lbs
Package Size: 30.5*23.5*7cm/12.01*9.25*2.76in
Package Weight: 1265g/2.79lbs
*Package Lists*:

1x Transmitter
1x Adapter with Cord for Transmitter
1x Receiver
1x Collar Strap
1x USB Cable for Receiver
2 x Long Metal Probes
2 x Short Metal Probes
2 x Short Conductive Silicone Caps
2 x Long Conductive Silicone Caps
1x Test Bulb
20 x Training Flags
1 Coil x Boundary Wire
2 x Screws
2 x Plastic Anchors
1x User Manual

Receiver: 

*Features*:

*3 Effective Correction Modes*:The receiver works automatically once you start up the system. If your dog walks out of the boundary,the preset correction signals will be delivered cycle by cycle until the receiver battery is out of power. Mode 1:Beep+Vibration;Mode 2: Beep+Low Level Shock;Mode 3:Beep+High Level Shock. We also offer 20 training flags for you to carry out proper training to ensure that the dog understands the boundaries and responds appropriately to the correction signals.
*High Sensitive Signal Receiver*:Built in high-sensitive chip,our dog training collar receiver can receive the remote controlling signals up to 77123Square FT/1.77Acre area(Can Be Adjusted On The GPCT4711 Transmitter).
*Universal Fit*:Made of PU leather,the dog collar strap is 61.5cm/24.21in long,which can be adjusted to fit your dog’s neck properly. Fit for dog of all sizes. We also offer 2 silicone caps to protect your dog’s neck.
*IPX8 Waterproof*:Made of durable ABS material and featured with IPX8 waterproof level,our receiver collar greatly extends its service life and allows your dog to play in wet grass or rainy weather.
*USB Rechargeable & Convenient*:Built in the 320mAh inbuilt rechargeable battery,our receiver keeps standby for 3-7 days after fully charged for 1.5-2 hours. You can charge the dog receiver with the GPCT4711 transmitter or any adapter with a USB port.

Friendly Reminder:
1. It’s important to adjust the collar to properly fit the dog’s neck.
2. For long-haired dogs,please trim some hair on your dog’s neck to ensure good contact of the metal probes.
3. Please do not let your dog wear the receiver collar for more than 12 hours per day(Recommend 2 Hours Every Time).
4. Please keep this receiver away from children to avoid their playing causing unintended electric shock.
5. Beep,vobration and shock signals can’t adjust level intensity.
6. Proper training is essential to ensure that the dog understands the boundaries and responds appropriately to the warning signals.
7. If your dog is aggressive,you’d better to consult with an animal professional before using our electronic dog fence system.
8. Only suitable for dogs.

*Specifications*:

​Product Type: Dog Receiver
Material: ABS +PU Leather
Input: 3.7V/0.01A
Inbuilt Battery: 320mAh Rechargeable Battery
Runtime: Around 3-7 Days
Charging Time: Around 1.5-2 Hours
3 Modes:
Waterproof Level: IPX8
Collar Strap Length: 61.5cm/24.21in
Item Size: 8x4x2.7cm/3.15x1.57x1.06in
Item Weight: 58g/0.13 lbs
Package Size: 8*6*6cm/3.15*2.36*2.36in
Package Weight: 133g/0.29lbs
*Package Lists*:

1x Receiver
1x Collar Strap
2 x Long Metal Probes
2 x Short Metal Probes
2 x Conductive Silicone Caps

Wire Only:

*Features*:

*Efficient Containment*:Helps to create an effective signal field with our GPCT4711 dog fence system to deter our dogs from the designated area,which greatly ensures our furry friends’ safety.
*Underground Boundary Wire*:Unlike traditional dog fence,our boundary wire can be buried underground,which creates a virtual boundary while effectively encourages our dog stay and roam freely in the designated area,keeping our beloved pet away from the uneasy of living in a real fence.
*Self-made Boundary Area*:with our 984 feet boundary wire,you can freely set an enclosed space in the yard for your dog to ensure its safety.
*Solid & Waterproof*:Constructed of 77Pcs copper wire,sturdy and waterproof. Can be spliced any types of boundary wires and suitable for dog training.
*Easy To Use*:Easy to set up an efficient dog fence system with our boundary wire via using a garden hoe or trencher.

Friendly Reminder:
1. Please read the user manual before wire burying.
2. For effective system,the wire must form a continuous loop. The signal is transmitted through the wire from one terminal to the other terminal of the transmitter.
3. Please make sure the boundary wire will not be cut off by the window,door or garage door.
4.Under ideal condition,a 300m/984ft boundary wire can cover about 1.77acre area(Single Loop). If you want larger containment area,you may need to prepare an additional coil of wire.
5. Underground wires can pose a hazard as they may carry high voltages.
6. For normal signal,please use insulation tape for wire connection.
7. For better signal,you can create a double loop when burying the wire.
8. It is essential to mark all underground wire positions when burying.

*Specifications*:

​Product Type: Dog Fence Wire
Color: Black
Material: 77Pcs Copper Wire
Wire Length: 300m/984FT
Suggested Wire Bury Depth: 1-2in Underground
Rolled Item Size: 12.2×12.2×6cm/4.8×4.8×2.36in
Item Weight: 633g/1.4 lbs
Package Size: 12*12*6.5cm/4.72*4.72*2.56in
Package Weight: 660g/1.46lbs
*Package Lists*:

1 Roll x Dog Fence Wire